Service Hotline
+86-574-65325867

Slide Mould company

Home > Products > Slide Mould company

Product Categories

 
  • Shovel Mould

    Contact NowShovel Mould1.Product name: Shovel Mould 2.Part material: PP 3.Mould cavity: 4 cavity 4.Mould base: S50C 5.Core & cavity: P20 6.Runner: cold runner 7.Mould finish: polish and logo engraved 8.Mould life: 500K ~ 800K shots 9.Wear plates applied for longer mould life 10.Samples and videos for mould trials...Read More

  • Paint Roller Mould

    Contact NowPaint Roller Mouldthe paint roller consists of 3 components, but 2 moulds, one of them for 2 umbrella shaped part, different in diameter, sharing the same mould base.Read More

  • Bumper Mould

    Contact NowBumper Mould1.Product name: Bumper Mould 2.Part material: ABS 3.Mould cavity: 1 cavity 4.Mould base: S50C 5.Core & cavity: P20, H13, 718 6.Runner: hot runner from YUDO/ DME 7.Mould finish: polish 8.Mould life: 800K ~ 1000K shots 9.Wear plates applied for longer mould life 10.Optimized design with...Read More

  • Rattan Table Mould- Full Square Table

    Contact NowRattan Table Mould- Full Square Tableone mould with 3 cores & 3 cavities to form table with rattan texture, wood texture and empty table for other inserts.Read More

  • Filter Mould

    Contact NowFilter Mould1.Product name: Filter Mould 2.Part material: PA, PA6 3.Mould cavity: 2 cavity 4.Mould base: S50C 5.Core & cavity: P20, 2738, 718H, NAK80, SKD61, H13 6.Runner: hot runner from YUDO/ DME 7.Mould finish: polish 8.Mould life: 800K ~ 1000K shots 9.Wear plates applied for longer mould life...Read More

  • Slide Mould

    Contact NowSlide Mould1.Product name: Big Slide Mould & Small Slide Mould & Low Cost Slide Mould 2.Part material: PE for big slide ladder mould & handle mould, rest parts with PP 3.Mould cavity: 2cav for handle, 1 cavity for rest parts 4.Mould base: S50C 5.Core & cavity: AL7050 for PE ladder &...Read More

  • Edible Oil Cap Mould

    Contact NowEdible Oil Cap Mould1.Product name: Edible Oil Cap Mould 2.Part material: PP/PE 3.Mould cavity: multi-cavity 4.Mould base: S50C, P20, LKM, DME standard 5.Mould core & cavity: S136, 2316 6.Hot runner: DME, YUDO, Mold Master, or as per client’s request. 7.Mould finish: mirror polish, texture 8.Cycle time: 12sec ~...Read More

Feedback
Send
Contact Us
Address: No. 120-223, Bldg 6, Mould Industrial Park, Economic Development Zone, Ninghai, Ningbo, Zhejiang, R.R.China
Tel: +86-574-65325867
Fax: +86-574-82550220
E-mail: allison820@163.com
Copyright © Ningbo Euro Mould & Plastic Co.,Ltd All rights reserved.