Service Hotline
+86-574-65325867

Potty Mould engineering

Home > Products > Potty Mould engineering

Product Categories

 
  • Bumper Mould

    Contact NowBumper Mould1.Product name: Bumper Mould 2.Part material: ABS 3.Mould cavity: 1 cavity 4.Mould base: S50C 5.Core & cavity: P20, H13, 718 6.Runner: hot runner from YUDO/ DME 7.Mould finish: polish 8.Mould life: 800K ~ 1000K shots 9.Wear plates applied for longer mould life 10.Optimized design with...Read More

  • Rattan Table Insert Mould

    Contact NowRattan Table Insert MouldThere for 3 insert core & cavity for this rattan table insert mould, sharing one mould base. with inserts for wood texture, rattan texture & empty one for other inserts. It requires high prescision on mould part machining in order to share the common mould base.Read More

  • Paint Roller Mould

    Contact NowPaint Roller Mouldthe paint roller consists of 3 components, but 2 moulds, one of them for 2 umbrella shaped part, different in diameter, sharing the same mould base.Read More

  • Edible Oil Cap Mould

    Contact NowEdible Oil Cap Mould1.Product name: Edible Oil Cap Mould 2.Part material: PP/PE 3.Mould cavity: multi-cavity 4.Mould base: S50C, P20, LKM, DME standard 5.Mould core & cavity: S136, 2316 6.Hot runner: DME, YUDO, Mold Master, or as per client’s request. 7.Mould finish: mirror polish, texture 8.Cycle time: 12sec ~...Read More

  • Rattan Table Mould- Full Square Table

    Contact NowRattan Table Mould- Full Square Tableone mould with 3 cores & 3 cavities to form table with rattan texture, wood texture and empty table for other inserts.Read More

  • Rope Locker Mould

    Contact NowRope Locker Mould1.Product name: Rope Locker Mould 2.Part material: PP 3.Mould cavity: 8 cavity 4.Mould base: S50C 5.Core & cavity: P20, 718 6.Runner: cold runner 7.Mould finish: polish and logo engraved 8.Mould life: 500K ~ 800K shots 9.Wear plates applied for longer mould life 10.Samples and videos for...Read More

  • Swing Top Dust Bin Mould

    Contact NowSwing Top Dust Bin Mould1.Product name: Swing Top Dust Bin Mould 2.Part material: PP 3.Mould cavity: single cavity 4.Mould base: S50C, P20, LKM / DME standard 5.Core & cavity: P20 6.Runner: cold runner or hot tip from DME, YUDO or as per client’s request 7.Mould finish: polish and logo engraved 8.Mould life: 500k ~...Read More

Feedback
Send
Contact Us
Address: No. 120-223, Bldg 6, Mould Industrial Park, Economic Development Zone, Ninghai, Ningbo, Zhejiang, R.R.China
Tel: +86-574-65325867
Fax: +86-574-82550220
E-mail: allison820@163.com
Copyright © Ningbo Euro Mould & Plastic Co.,Ltd All rights reserved.