Service Hotline
+86-574-65325867

Plastic Swing Mould maker

Home > Products > Plastic Swing Mould maker

Product Categories

 
  • Auto Air Conditioner Mould

    Contact NowAuto Air Conditioner Mould1.Product name: Auto-Air Conditioner Mould 2.Part material: PP 3.Mould cavity: 2-cavity 4.Mould base: S50C 5.Core & cavity: 718, H13 6.Runner: hot runner from YUDO/ DME 7.Mould finish: polish 8.Cycle time: 40sec/shot 9.Mould life: 800K ~ 1000K shots 10.Wear plates applied for longer mould...Read More

  • Edible Oil Cap Mould

    Contact NowEdible Oil Cap Mould1.Product name: Edible Oil Cap Mould 2.Part material: PP/PE 3.Mould cavity: multi-cavity 4.Mould base: S50C, P20, LKM, DME standard 5.Mould core & cavity: S136, 2316 6.Hot runner: DME, YUDO, Mold Master, or as per client’s request. 7.Mould finish: mirror polish, texture 8.Cycle time: 12sec ~...Read More

  • Rattan Table Mould-half Rectangular Table

    Contact NowRattan Table Mould-half Rectangular TableThere for 3 insert core & cavity for this mould, sharing one mould base. with inserts for wood texture, rattan texture & empty one for other inserts. It requires high prescision on mould part machining in order to share the common mould base.Read More

  • Drum Blow Mould

    Contact NowDrum Blow Mould1.Product material: HDPE 2.Mould cavity: single cavity 3.Mould material: S50C, P20, AL, AL7075 with berrylium copper inserts at neck and bottom,, S136 4.Deflasher / dummy mould: not available 5.Mould finish: polish and sandblasted 6.Samples and videos for mould trials available for clients to...Read More

  • Paint Roller Mould

    Contact NowPaint Roller Mouldthe paint roller consists of 3 components, but 2 moulds, one of them for 2 umbrella shaped part, different in diameter, sharing the same mould base.Read More

  • Armed Chair Mould

    Contact NowArmed Chair Mould1.Product name: Armed Chair Mould 2.Part material: PP 3.Mould cavity: single cavity 4.Mould base: S50C, P20, LKM / DME standard 5.Core & cavity: P20 6.Runner: cold runner or hot tip from DME, YUDO or as per client’s request 7.Mould finish: polish and logo engraved 8.Mould life: 500k ~ 800k...Read More

Feedback
Send
Contact Us
Address: No. 120-223, Bldg 6, Mould Industrial Park, Economic Development Zone, Ninghai, Ningbo, Zhejiang, R.R.China
Tel: +86-574-65325867
Fax: +86-574-82550220
E-mail: allison820@163.com
Copyright © Ningbo Euro Mould & Plastic Co.,Ltd All rights reserved.