Service Hotline
+86-574-65325867

Nestable Pallet Mould maker

Home > Products > Nestable Pallet Mould maker

Product Categories

 
  • Auto Air Conditioner Mould

    Contact NowAuto Air Conditioner Mould1.Product name: Auto-Air Conditioner Mould 2.Part material: PP 3.Mould cavity: 2-cavity 4.Mould base: S50C 5.Core & cavity: 718, H13 6.Runner: hot runner from YUDO/ DME 7.Mould finish: polish 8.Cycle time: 40sec/shot 9.Mould life: 800K ~ 1000K shots 10.Wear plates applied for longer mould...Read More

  • Armed Chair Mould

    Contact NowArmed Chair Mould1.Product name: Armed Chair Mould 2.Part material: PP 3.Mould cavity: single cavity 4.Mould base: S50C, P20, LKM / DME standard 5.Core & cavity: P20 6.Runner: cold runner or hot tip from DME, YUDO or as per client’s request 7.Mould finish: polish and logo engraved 8.Mould life: 500k ~ 800k...Read More

  • Thin Wall Food Tub Mould

    Contact NowThin Wall Food Tub Mould1.Product name: Thin Wall Food Tub Mould 2.Part material: PP 3.Mould cavity: single cavity ~ 4cavity 4.Mould base: P20, S136 5.Core & cavity: S136 6.Runner: hot runner from DME, YUDO or as per client’s request 7.Mould finish: mirror polish and logo engraved 8.Mould life: 3million ~ 5 million...Read More

  • Rattan Chair Mould

    Contact NowRattan Chair Mould1.Product name: Rattan Chair Mould 2.Part material: PP 3.Mould cavity: single cavity 4.Mould base: S50C, P20, LKM / DME standard 5.Core & cavity: P20, interchangeable backseat available 6.Runner: cold runner or hot tip from DME, YUDO or as per client’s request 7.Mould finish: polish and logo...Read More

  • Flip Top Cap Mould

    Contact NowFlip Top Cap Mould1.Product name: Flip Top Cap Mould 2.Part material: PP, designed for lotion bottles or sauce bottles, etc 3.Mould cavity: 4cav to multi-cavity 4.Mould base: S50C, P20, LKM, DME standard 5.Mould core & cavity: S136 6.Hot runner: DME, YUDO, Mold Master, or as per client’s request. 7.Mould...Read More

  • Paint Roller Mould

    Contact NowPaint Roller Mouldthe paint roller consists of 3 components, but 2 moulds, one of them for 2 umbrella shaped part, different in diameter, sharing the same mould base.Read More

  • Sports Cap Mould

    Contact NowSports Cap Mould1.Product name: Sports Cap Mould 2.Part material: PE 3.Mould cavity: multi-cavity 4.Mould base: S50C, P20, 5.Mould core & cavity: 2316, S136 6.Slider: SKD 61, 2316, S136 7.Hot runner: DME, YUDO, Mold Master, or as per client’s request. 8.Cold runner also available for low cavity no. 9.Mould...Read More

Feedback
Send
Contact Us
Address: No. 120-223, Bldg 6, Mould Industrial Park, Economic Development Zone, Ninghai, Ningbo, Zhejiang, R.R.China
Tel: +86-574-65325867
Fax: +86-574-82550220
E-mail: allison820@163.com
Copyright © Ningbo Euro Mould & Plastic Co.,Ltd All rights reserved.