Service Hotline
+86-574-65325867

Jerrycan Blow Mould maker

Home > Products > Jerrycan Blow Mould maker

Product Categories

 
  • Milk Bottle Mould

    Contact NowMilk Bottle Mould1.Product material: PP, HDPE, LDPE, etc 2.Mould cavity: single cavity to multi-cavity 3.Mould material: S50C, P20, AL, AL7075 with berrylium copper inserts at neck and bottom,, S136 4.Deflasher / dummy mould: as optional 5.Mould finish: polish and sandblasted 6.Samples and videos for mould...Read More

  • Potty Mould

    Contact NowPotty Mould1.Product name: Potty Mould 2.Part material: PP 3.Mould cavity: single cavity 4.Mould base: S50C 5.Core & cavity: P20, 718 6.Runner: hot runner from DME 7.Mould finish: polish and logo engraved 8.Mould life: 800K ~ 1 million shots 9.Optimal design with max. cooling water up to the product...Read More

  • Attached Lid Container Mould

    Contact NowAttached Lid Container Mould1.Product name: Attached Lid Crate Mould 2.Part material: PP 3.Mould cavity: single cavity ~ 4cavity 4.Mould base: S50C, P20 5.Core & cavity: P20, 718, H13, S136 6.Runner: hot runner from DME, YUDO or as per client’s request 7.Mould finish: polish and logo engraved 8.Mould life: 500K ~ 800K...Read More

  • Pedalled Dust Bin Mould

    Contact NowPedalled Dust Bin Mould1.Product name: Pedaled Dust Bin Mould 2.Part material: PP 3.Mould cavity: single cavity 4.Mould base: S50C, P20, LKM / DME standard 5.Core & cavity: P20 6.Runner: cold runner or hot tip from DME, YUDO or as per client’s request 7.Mould finish: polish and logo engraved 8.Mould life: 500k ~...Read More

  • Shovel Mould

    Contact NowShovel Mould1.Product name: Shovel Mould 2.Part material: PP 3.Mould cavity: 4 cavity 4.Mould base: S50C 5.Core & cavity: P20 6.Runner: cold runner 7.Mould finish: polish and logo engraved 8.Mould life: 500K ~ 800K shots 9.Wear plates applied for longer mould life 10.Samples and videos for mould trials...Read More

  • Paint Roller Mould

    Contact NowPaint Roller Mouldthe paint roller consists of 3 components, but 2 moulds, one of them for 2 umbrella shaped part, different in diameter, sharing the same mould base.Read More

  • Rattan Table Mould-half Rectangular Table

    Contact NowRattan Table Mould-half Rectangular TableThere for 3 insert core & cavity for this mould, sharing one mould base. with inserts for wood texture, rattan texture & empty one for other inserts. It requires high prescision on mould part machining in order to share the common mould base.Read More

  • Bale Arm Crate Mould

    Contact NowBale Arm Crate Mould1.Product name: Bale Arm Crate Mould 2.Part material: PP 3.Mould cavity: single cavity ~ 4cavity 4.Mould base: S50C, P20 5.Core & cavity: P20, 718, H13, S136 6.Runner: hot runner from DME, YUDO or as per client’s request 7.Mould finish: polish and logo engraved 8.Mould life: 500K ~ 800K...Read More

  • Sports Cap Mould

    Contact NowSports Cap Mould1.Product name: Sports Cap Mould 2.Part material: PE 3.Mould cavity: multi-cavity 4.Mould base: S50C, P20, 5.Mould core & cavity: 2316, S136 6.Slider: SKD 61, 2316, S136 7.Hot runner: DME, YUDO, Mold Master, or as per client’s request. 8.Cold runner also available for low cavity no. 9.Mould...Read More

  • Air Conditioner Mould

    Contact NowAir Conditioner Mould1.Product name: Air Conditioner Mould 2.Part material: ABS 3.Mould cavity: single cavity 4.Mould base: S50C 5.Core & cavity: 718 6.Runner: hot runner from YUDO/ DME 7.Mould finish: manual polish 8.Cycle time: 30sec/shot 9.Mould life: 800K ~ 1000K shots 10.Wear plates applied for longer mould...Read More

Feedback
Send
Contact Us
Address: No. 120-223, Bldg 6, Mould Industrial Park, Economic Development Zone, Ninghai, Ningbo, Zhejiang, R.R.China
Tel: +86-574-65325867
Fax: +86-574-82550220
E-mail: allison820@163.com
Copyright © Ningbo Euro Mould & Plastic Co.,Ltd All rights reserved.