Service Hotline
+86-574-65325867

Flip Top Cap Mould company

Home > Products > Flip Top Cap Mould company

Product Categories

 
  • Ponton Blow Mould

    Contact NowPonton Blow Mould1.Product material: HPPE, 2.Mould cavity: single cavity 3.Mould material: S50C, P20, AL, AL7075 with berrylium copper inserts, S136, suggest making the pontoon mould with AL or AL7075 for better cooling to shorten the cycle time. 4.Deflasher / dummy mould: not available 5.Mould finish: polish...Read More

  • Rattan Table Mould- Full Square Table

    Contact NowRattan Table Mould- Full Square Tableone mould with 3 cores & 3 cavities to form table with rattan texture, wood texture and empty table for other inserts.Read More

  • Auto Lamp Mould

    Contact NowAuto Lamp Mould1.Product name: Auto-Lamp Mould 2.Part material: PP/ PC 3.Mould cavity: 2-cavity 4.Mould base: S50C 5.Core & cavity: H13, 2738 6.Runner: hot runner from YUDO/ DME 7.Mould finish: mirror polish 8.Cycle time: 40sec/shot 9.Mould life: 800K ~ 1000K shots 10.Wear plates applied for longer mould...Read More

  • Rattan Table Leg Mould

    Contact NowRattan Table Leg Mould2cav rattan texture table leg mould, with core pullingRead More

  • Oil Tank Mould

    Contact NowOil Tank Mould1.Product name: Auto Oil Tank Mould 2.Part material: PP/multi-layer 3.Mould cavity: 1 cavity 4.Mould base: S50C 5.Core & cavity: AL7075 6.Mould finish: polish with logo engraved 7.Optimized design with maximum cooling water 8.Samples and videos for mould trials available for clients to check...Read More

  • Flip Top Cap Mould

    Contact NowFlip Top Cap Mould1.Product name: Flip Top Cap Mould 2.Part material: PP, designed for lotion bottles or sauce bottles, etc 3.Mould cavity: 4cav to multi-cavity 4.Mould base: S50C, P20, LKM, DME standard 5.Mould core & cavity: S136 6.Hot runner: DME, YUDO, Mold Master, or as per client’s request. 7.Mould...Read More

  • Juice Bottle Mould

    Contact NowJuice Bottle Mould1.Product material: PP, PE 2.Mould cavity: single cavity to multi-cavity 3.Mould material: S50C, P20, AL, AL7075 with berrylium copper inserts at neck and bottom,, S136 4.Deflasher / dummy mould: as optional 5.Mould finish: polish and sandblasted 6.Samples and videos for mould trials available...Read More

Feedback
Send
Contact Us
Address: No. 120-223, Bldg 6, Mould Industrial Park, Economic Development Zone, Ninghai, Ningbo, Zhejiang, R.R.China
Tel: +86-574-65325867
Fax: +86-574-82550220
E-mail: allison820@163.com
Copyright © Ningbo Euro Mould & Plastic Co.,Ltd All rights reserved.