Service Hotline
+86-574-65325867

Custom Refrigerator Mould

Home > Products > Custom Refrigerator Mould

Product Categories

 
  • Sports Cap Mould

    Contact NowSports Cap Mould1.Product name: Sports Cap Mould 2.Part material: PE 3.Mould cavity: multi-cavity 4.Mould base: S50C, P20, 5.Mould core & cavity: 2316, S136 6.Slider: SKD 61, 2316, S136 7.Hot runner: DME, YUDO, Mold Master, or as per client’s request. 8.Cold runner also available for low cavity no. 9.Mould...Read More

  • Paint Roller Mould

    Contact NowPaint Roller Mouldthe paint roller consists of 3 components, but 2 moulds, one of them for 2 umbrella shaped part, different in diameter, sharing the same mould base.Read More

  • Bumper Mould

    Contact NowBumper Mould1.Product name: Bumper Mould 2.Part material: ABS 3.Mould cavity: 1 cavity 4.Mould base: S50C 5.Core & cavity: P20, H13, 718 6.Runner: hot runner from YUDO/ DME 7.Mould finish: polish 8.Mould life: 800K ~ 1000K shots 9.Wear plates applied for longer mould life 10.Optimized design with...Read More

  • Beer Crate Mould

    Contact NowBeer Crate Mould1.Product name: Beer Crate Mould 2.Part material: PP 3.Mould cavity: single cavity ~ 4cavity 4.Mould base: S50C, P20 5.Core & cavity: P20, 718, H13, S136 6.Runner: hot runner from DME, YUDO or as per client’s request 7.Mould finish: polish and logo engraved 8.Mould life: 500K ~ 800K shots...Read More

  • Washer Mould

    Contact NowWasher Mould1.Product name: Washing Machine 2.Part material: PP, ABS 3.Mould cavity: single cavity 4.Mould base: S50C 5.Core & cavity: P20, 718, H13 6.Runner: cold runner for wave wheel, hot runner from YUDO for cover 7.Mould finish: polish 8.Mould life: 500K ~ 800K shots 9.Wear plates applied for...Read More

  • Drum Blow Mould

    Contact NowDrum Blow Mould1.Product material: HDPE 2.Mould cavity: single cavity 3.Mould material: S50C, P20, AL, AL7075 with berrylium copper inserts at neck and bottom,, S136 4.Deflasher / dummy mould: not available 5.Mould finish: polish and sandblasted 6.Samples and videos for mould trials available for clients to...Read More

  • Rattan Table Leg Mould

    Contact NowRattan Table Leg Mould2cav rattan texture table leg mould, with core pullingRead More

  • Rattan Chair Mould

    Contact NowRattan Chair Mould1.Product name: Rattan Chair Mould 2.Part material: PP 3.Mould cavity: single cavity 4.Mould base: S50C, P20, LKM / DME standard 5.Core & cavity: P20, interchangeable backseat available 6.Runner: cold runner or hot tip from DME, YUDO or as per client’s request 7.Mould finish: polish and logo...Read More

  • Auto Air Conditioner Mould

    Contact NowAuto Air Conditioner Mould1.Product name: Auto-Air Conditioner Mould 2.Part material: PP 3.Mould cavity: 2-cavity 4.Mould base: S50C 5.Core & cavity: 718, H13 6.Runner: hot runner from YUDO/ DME 7.Mould finish: polish 8.Cycle time: 40sec/shot 9.Mould life: 800K ~ 1000K shots 10.Wear plates applied for longer mould...Read More

Feedback
Send
Contact Us
Address: No. 120-223, Bldg 6, Mould Industrial Park, Economic Development Zone, Ninghai, Ningbo, Zhejiang, R.R.China
Tel: +86-574-65325867
Fax: +86-574-82550220
E-mail: allison820@163.com
Copyright © Ningbo Euro Mould & Plastic Co.,Ltd All rights reserved.