Service Hotline
+86-574-65325867

Bale Arm Crate Mould refurbish

Home > Products > Bale Arm Crate Mould refurbish

Product Categories

 
  • Snap On Cap Mould

    Contact NowSnap On Cap Mould1.Product name Snap On Cap Mould 2.Part material: PP/PE 3.Mould cavity: multi-cavity 4.Mould base: S50C, P20, LKM, DME standard 5.Mould core & cavity: S136, 2316 6.Hot runner: DME, YUDO, Mold Master, or as per client’s request. 7.Mould finish: mirror polish, texture 8.Cycle time: 12sec ~...Read More

  • Child Resistant Cap Mould

    Contact NowChild Resistant Cap Mould1.Product Name: Child Resistant Cap Mould 2.Part material: PE 3.Mould cavity: multi-cavity 4.Mould base: S50C, P20, 5.Mould core & cavity: 2316, S136 6.Slider: SKD 61, 2316, S136 7.Hot runner: DME, YUDO, Mold Master, or as per client’s request. 8.Cold runner also available for low cavity no....Read More

  • Juice Bottle Mould

    Contact NowJuice Bottle Mould1.Product material: PP, PE 2.Mould cavity: single cavity to multi-cavity 3.Mould material: S50C, P20, AL, AL7075 with berrylium copper inserts at neck and bottom,, S136 4.Deflasher / dummy mould: as optional 5.Mould finish: polish and sandblasted 6.Samples and videos for mould trials available...Read More

  • Shovel Mould

    Contact NowShovel Mould1.Product name: Shovel Mould 2.Part material: PP 3.Mould cavity: 4 cavity 4.Mould base: S50C 5.Core & cavity: P20 6.Runner: cold runner 7.Mould finish: polish and logo engraved 8.Mould life: 500K ~ 800K shots 9.Wear plates applied for longer mould life 10.Samples and videos for mould trials...Read More

  • Euro Pallet Mould

    Contact NowEuro Pallet Mould1.Product name: Euro Pallet Mould 2.Part material: PP 3.Mould cavity: single cavity 4.Mould base: S50C, P20 5.Core & cavity: P20, 718, H13 6.Runner: hot runner from DME, YUDO or as per client’s request 7.Mould finish: polish and logo engraved 8.Mould life: 500K ~ 800K shots 9.Optimal design...Read More

  • Export Pallet Mould

    Contact NowExport Pallet Mould1.Product name: Export Pallet Mould 2.Part material: PP 3.Mould cavity: single cavity 4.Mould base: S50C, P20 5.Core & cavity: P20, 718, H13 6.Runner: hot runner from DME, YUDO or as per client’s request 7.Mould finish: polish and logo engraved 8.Mould life: 500K ~ 800K shots 9.Optimal...Read More

Feedback
Send
Contact Us
Address: No. 120-223, Bldg 6, Mould Industrial Park, Economic Development Zone, Ninghai, Ningbo, Zhejiang, R.R.China
Tel: +86-574-65325867
Fax: +86-574-82550220
E-mail: allison820@163.com
Copyright © Ningbo Euro Mould & Plastic Co.,Ltd All rights reserved.