Service Hotline
+86-574-65325867

Bale Arm Crate Mould factory

Home > Products > Bale Arm Crate Mould factory

Product Categories

 
  • Sports Cap Mould

    Contact NowSports Cap Mould1.Product name: Sports Cap Mould 2.Part material: PE 3.Mould cavity: multi-cavity 4.Mould base: S50C, P20, 5.Mould core & cavity: 2316, S136 6.Slider: SKD 61, 2316, S136 7.Hot runner: DME, YUDO, Mold Master, or as per client’s request. 8.Cold runner also available for low cavity no. 9.Mould...Read More

  • Armed Chair Mould

    Contact NowArmed Chair Mould1.Product name: Armed Chair Mould 2.Part material: PP 3.Mould cavity: single cavity 4.Mould base: S50C, P20, LKM / DME standard 5.Core & cavity: P20 6.Runner: cold runner or hot tip from DME, YUDO or as per client’s request 7.Mould finish: polish and logo engraved 8.Mould life: 500k ~ 800k...Read More

  • Refrigerator Mould

    Contact NowRefrigerator Mould1.Product name: Refrigerator Drawer Mould 2.Part material: ABS 3.Mould cavity: single cavity 4.Mould base: S50C 5.Core & cavity: 2738 6.Runner: hot runner from YUDO/ DME 7.Mould finish: manual polish 8.Cycle time: 40sec/shot 9.Mould life: 800K ~ 1000K shots 10.Wear plates applied for longer...Read More

  • Slide Mould

    Contact NowSlide Mould1.Product name: Big Slide Mould & Small Slide Mould & Low Cost Slide Mould 2.Part material: PE for big slide ladder mould & handle mould, rest parts with PP 3.Mould cavity: 2cav for handle, 1 cavity for rest parts 4.Mould base: S50C 5.Core & cavity: AL7050 for PE ladder &...Read More

  • Front Grill Mould

    Contact NowFront Grill Mould1.Product name: Grill Mould 2.Part material: PA, PA6, POM, PP 3.Mould cavity: 1 cavity 4.Mould base: S50C 5.Core & cavity: P20, 2738, 718H, NAK80, SKD61, H13 6.Runner: hot runner from YUDO/ DME 7.Mould finish: high polish 8.Mould life: 800K ~ 1000K shots 9.Wear plates applied for longer...Read More

  • Snap On Cap Mould

    Contact NowSnap On Cap Mould1.Product name Snap On Cap Mould 2.Part material: PP/PE 3.Mould cavity: multi-cavity 4.Mould base: S50C, P20, LKM, DME standard 5.Mould core & cavity: S136, 2316 6.Hot runner: DME, YUDO, Mold Master, or as per client’s request. 7.Mould finish: mirror polish, texture 8.Cycle time: 12sec ~...Read More

Feedback
Send
Contact Us
Address: No. 120-223, Bldg 6, Mould Industrial Park, Economic Development Zone, Ninghai, Ningbo, Zhejiang, R.R.China
Tel: +86-574-65325867
Fax: +86-574-82550220
E-mail: allison820@163.com
Copyright © Ningbo Euro Mould & Plastic Co.,Ltd All rights reserved.