Service Hotline
+86-574-65325867

Attached Lid Container Mould maker

Home > Products > Attached Lid Container Mould maker

Product Categories

 
  • Rattan Chair Mould

    Contact NowRattan Chair Mould1.Product name: Rattan Chair Mould 2.Part material: PP 3.Mould cavity: single cavity 4.Mould base: S50C, P20, LKM / DME standard 5.Core & cavity: P20, interchangeable backseat available 6.Runner: cold runner or hot tip from DME, YUDO or as per client’s request 7.Mould finish: polish and logo...Read More

  • Auto Lamp Mould

    Contact NowAuto Lamp Mould1.Product name: Auto-Lamp Mould 2.Part material: PP/ PC 3.Mould cavity: 2-cavity 4.Mould base: S50C 5.Core & cavity: H13, 2738 6.Runner: hot runner from YUDO/ DME 7.Mould finish: mirror polish 8.Cycle time: 40sec/shot 9.Mould life: 800K ~ 1000K shots 10.Wear plates applied for longer mould...Read More

  • Drum Blow Mould

    Contact NowDrum Blow Mould1.Product material: HDPE 2.Mould cavity: single cavity 3.Mould material: S50C, P20, AL, AL7075 with berrylium copper inserts at neck and bottom,, S136 4.Deflasher / dummy mould: not available 5.Mould finish: polish and sandblasted 6.Samples and videos for mould trials available for clients to...Read More

  • Beach Chair Mould

    Contact NowBeach Chair Mould1.Product name: Beach Chair Mould 2.Part material: PP 3.Mould cavity: single cavity 4.Mould base: S50C, P20, LKM / DME standard 5.Core & cavity: P20, interchangeable backseat available 6.Runner: cold runner or hot tip from DME, YUDO or as per client’s request 7.Mould finish: polish and logo...Read More

  • Detergent Bottle Mould

    Contact NowDetergent Bottle Mould1.Product material: HPPE 2.Mould cavity: single cavity to multi-cavity 3.Mould material: S50C, P20, AL, AL7075 with berrylium copper inserts at neck and bottom,, S136 4.Deflasher / dummy mould: as optional 5.Mould finish: polish and sandblasted 6.Samples and videos for mould trials available for...Read More

  • Paint Roller Mould

    Contact NowPaint Roller Mouldthe paint roller consists of 3 components, but 2 moulds, one of them for 2 umbrella shaped part, different in diameter, sharing the same mould base.Read More

  • Slide Mould

    Contact NowSlide Mould1.Product name: Big Slide Mould & Small Slide Mould & Low Cost Slide Mould 2.Part material: PE for big slide ladder mould & handle mould, rest parts with PP 3.Mould cavity: 2cav for handle, 1 cavity for rest parts 4.Mould base: S50C 5.Core & cavity: AL7050 for PE ladder &...Read More

  • PC Chair Mould PC

    Contact NowPC Chair Mould PC1.Product name: PC Chair Mould 2.Part material: PC 3.Mould cavity: single cavity 4.Mould base: S50C, P20, LKM / DME standard 5.Core & cavity: P20 6.Runner: hot tip from DME, YUDO or as per client’s request 7.Mould finish: polish and logo engraved 8.Mould life: 500k ~ 800k shots 9.Optimal...Read More

Feedback
Send
Contact Us
Address: No. 120-223, Bldg 6, Mould Industrial Park, Economic Development Zone, Ninghai, Ningbo, Zhejiang, R.R.China
Tel: +86-574-65325867
Fax: +86-574-82550220
E-mail: allison820@163.com
Copyright © Ningbo Euro Mould & Plastic Co.,Ltd All rights reserved.