Service Hotline
+86-574-65325867

Attached Lid Container Mould company

Home > Products > Attached Lid Container Mould company

Product Categories

 
  • Air Conditioner Mould

    Contact NowAir Conditioner Mould1.Product name: Air Conditioner Mould 2.Part material: ABS 3.Mould cavity: single cavity 4.Mould base: S50C 5.Core & cavity: 718 6.Runner: hot runner from YUDO/ DME 7.Mould finish: manual polish 8.Cycle time: 30sec/shot 9.Mould life: 800K ~ 1000K shots 10.Wear plates applied for longer mould...Read More

  • Rattan Table Leg Mould

    Contact NowRattan Table Leg Mould2cav rattan texture table leg mould, with core pullingRead More

  • Front Grill Mould

    Contact NowFront Grill Mould1.Product name: Grill Mould 2.Part material: PA, PA6, POM, PP 3.Mould cavity: 1 cavity 4.Mould base: S50C 5.Core & cavity: P20, 2738, 718H, NAK80, SKD61, H13 6.Runner: hot runner from YUDO/ DME 7.Mould finish: high polish 8.Mould life: 800K ~ 1000K shots 9.Wear plates applied for longer...Read More

  • Bumper Mould

    Contact NowBumper Mould1.Product name: Bumper Mould 2.Part material: ABS 3.Mould cavity: 1 cavity 4.Mould base: S50C 5.Core & cavity: P20, H13, 718 6.Runner: hot runner from YUDO/ DME 7.Mould finish: polish 8.Mould life: 800K ~ 1000K shots 9.Wear plates applied for longer mould life 10.Optimized design with...Read More

  • Flip Top Cap Mould

    Contact NowFlip Top Cap Mould1.Product name: Flip Top Cap Mould 2.Part material: PP, designed for lotion bottles or sauce bottles, etc 3.Mould cavity: 4cav to multi-cavity 4.Mould base: S50C, P20, LKM, DME standard 5.Mould core & cavity: S136 6.Hot runner: DME, YUDO, Mold Master, or as per client’s request. 7.Mould...Read More

  • Beach Chair Mould

    Contact NowBeach Chair Mould1.Product name: Beach Chair Mould 2.Part material: PP 3.Mould cavity: single cavity 4.Mould base: S50C, P20, LKM / DME standard 5.Core & cavity: P20, interchangeable backseat available 6.Runner: cold runner or hot tip from DME, YUDO or as per client’s request 7.Mould finish: polish and logo...Read More

  • Rattan Table Mould- Full Square Table

    Contact NowRattan Table Mould- Full Square Tableone mould with 3 cores & 3 cavities to form table with rattan texture, wood texture and empty table for other inserts.Read More

  • Sport Bottle Mould

    Contact NowSport Bottle Mould1.Product material: PP, PE 2.Mould cavity: single cavity to multi-cavity 3.Mould material: S50C, P20, AL, AL7075 with berrylium copper inserts at neck and bottom,, S136 4.Deflasher / dummy mould: as optional 5.Mould finish: polish and sandblasted 6.Samples and videos for mould trials available...Read More

  • Child Resistant Cap Mould

    Contact NowChild Resistant Cap Mould1.Product Name: Child Resistant Cap Mould 2.Part material: PE 3.Mould cavity: multi-cavity 4.Mould base: S50C, P20, 5.Mould core & cavity: 2316, S136 6.Slider: SKD 61, 2316, S136 7.Hot runner: DME, YUDO, Mold Master, or as per client’s request. 8.Cold runner also available for low cavity no....Read More

  • Washer Mould

    Contact NowWasher Mould1.Product name: Washing Machine 2.Part material: PP, ABS 3.Mould cavity: single cavity 4.Mould base: S50C 5.Core & cavity: P20, 718, H13 6.Runner: cold runner for wave wheel, hot runner from YUDO for cover 7.Mould finish: polish 8.Mould life: 500K ~ 800K shots 9.Wear plates applied for...Read More

Feedback
Send
Contact Us
Address: No. 120-223, Bldg 6, Mould Industrial Park, Economic Development Zone, Ninghai, Ningbo, Zhejiang, R.R.China
Tel: +86-574-65325867
Fax: +86-574-82550220
E-mail: allison820@163.com
Copyright © Ningbo Euro Mould & Plastic Co.,Ltd All rights reserved.